We are Fix water Leaks 100% guarunty Service
Water leaking through concrete cracks, construction joints or structural surfaces leads to persistent dampness and damage if the source isn’t properly addressed. PU injection is a specialised method for sealing suitable leakage paths inside concrete.
Leaking wall, slab, ceiling or basement? The right injection approach depends on where the water comes from and the condition of the structure.
★★★★★
Google Rated (75+ reviews)
Certified
& Licensed
EXCELLENT
Based on 75 reviews
Posted on Google![]()
rama krishnanTrustindex verifies that the original source of the review is Google.
Excellent Roof Leak Repair & Waterproofing Service! We engaged Skyproof Roofing Pte Ltd for roof leak repair, tile washing, gap sealing, and waterproofing. Ali, the Operations Manager, was professional and responsible. The team delivered excellent workmanship and completed the job on time. Highly recommended!Posted on Google![]()
TheresaTrustindex verifies that the original source of the review is Google.
My boss engaged Skyproof Roofing to do our facade cleaning and exterior painting. Workers were hardworking and the workmanship was good. They cover up everything properly. Our house looks nice now. Thanks Ali and team!Posted on Google![]()
Natarajan VijaragavanTrustindex verifies that the original source of the review is Google.
Engaged Skyproof Roofing for window sealant replacement and water leakage repairs at our office building. Ali was very responsive and gave us good advice on how to resolve the leakage issues. The team was professional, careful with safety and completed the works smoothly without much disruption to our office operations. Workmanship was good and pricing was reasonable too. Overall very happy with their service. Thanks Ali and team, highly recommended! 👍Posted on Google![]()
icreate wealth plannersTrustindex verifies that the original source of the review is Google.
Ali & Team did a fantastic job. Highly competent & efficientPosted on Google![]()
palanisamy kannanTrustindex verifies that the original source of the review is Google.
Excellent service from Skyproof Roofing Pte Ltd! We engaged their team for roof tile cleaning, roof leak repairs, and waterproofing system painting at our landed property. The workmanship was excellent, and the price was very reasonable. The team was professional, careful, and followed proper safety procedures. Special thanks to Ali, the Operations Manager, for being responsive, responsible, and attentive throughout the project. We are very satisfied with the results. Highly recommended for their quality workmanship, reliable service, and reasonable pricing!Posted on Google![]()
Chin Seng YueTrustindex verifies that the original source of the review is Google.
Ali and his team did an excellent job in waterproofing and painting my 3-storey house, both interior and exterior. They had good attention to details, were diligent and conscientious, and completed the work early.Posted on Google![]()
Sherlyn AwTrustindex verifies that the original source of the review is Google.
The team at Skyproof were very professional and very pro active in giving updates about the status on roof repairs and waterproofing. They finished the repairs efficiently even though there was some heavy rain in between The roof looks really nice after they completed as they helped to change the colour of the roof. It now looks like new. And they provide a warranty too. In fact, they went out of the way and were accommodating to my requests to touch up an area I added without fuss even though it's wasn't initially mentioned. That I feel is very good service. Thank you very much!Posted on Google![]()
Tongli TradingTrustindex verifies that the original source of the review is Google.
well done.. support always
What We Do
PU injection is used for different concrete leakage problems. The right application depends on the affected area, how the leak behaves, accessibility and the condition of the concrete.
Water stains, bubbling paint or drips from your ceiling are more than an eyesore. They mean water is forcing its way through a crack in the concrete slab above. Skyproof’s PU injection ceiling leak repair in Singapore stops it at the source. Our experienced team injects high-grade polyurethane resin into the crack from below, where it expands and seals the water path tightly, with no hacking of your neighbour’s tiles upstairs. We trace the leak first, give you a clear quote, and leave your ceiling dry, clean and ready to repaint.
A hairline crack can let in a surprising amount of water, and it only gets worse with every storm. Skyproof’s concrete crack PU injection repair in Singapore fills leaking cracks in walls, slabs and beams from the inside out. We drill precise injection ports, then pump expanding PU resin deep into the crack until it is fully sealed. The result is a fast, clean and reliable repair that stops water without hacking, saves you time and money, and protects your concrete from further damage.
Flat concrete roofs bake under the Singapore sun and take a beating from heavy tropical rain, so cracks are only a matter of time. Skyproof’s RC roof slab PU injection waterproofing seals those leaking cracks from below, stopping water before it reaches your ceiling. There’s no need to strip the roof surface or disturb your rooftop. It’s a smart, cost-effective fix for landed homes, shophouses and low-rise buildings, and we’ll tell you honestly if your roof needs a full membrane instead.
02 — Ceilings & underground
Water on a ceiling may come from an upper-floor bathroom, wet area, pipework or a leakage path through the concrete slab.
A proper investigation finds the source first. Where the leak traces to a suitable crack, joint or pipe penetration, PU injection may be considered.
For basement walls, underground car parks, lift pits, retaining walls and other accessible underground concrete — assessed for water source, water pressure, access and the wider structure.
03 — Every property type
HDB flats, condominiums, apartments, landed houses and residential common areas. For shared property, check management or authority requirements first.
Offices, commercial buildings, industrial facilities, warehouses, basements and car parks. Larger structures are assessed carefully before a method is proposed.
A suitable polyurethane resin is introduced into the identified leakage path, where it reacts and cures to seal the route the water is passing through.
Where water enters, how far it spreads, and whether a crack, joint or interface is involved.
The right PU material and method for this leakage condition.
Injection points prepared and packers installed where required.
Resin injected with pressure controlled to material and site needs.
Resin cures, then the area is checked to see if the leak is controlled.
The right material depends on your building’s design, structure, and use. These are the roofing systems we install, replace, and maintain.
Seals suitable water-bearing cracks, joints and leakage paths in concrete.
Considered when : Water ingress is traced to an appropriate concrete pathway.
Creates a protective waterproof layer over a prepared surface.
Considered when : The issue involves a surface system or exposed area.
Applies a cement-based waterproof coating or layer.
Considered when : The substrate and project requirements suit it.
Installs a bituminous membrane waterproofing system.
Considered when : Suitable roof, terrace or membrane applications.
Bonds or repairs certain cracks where structural bonding is needed.
Considered when : Crack condition and engineering needs support it.
Success depends on correct diagnosis, material selection and application. Your contractor should understand the leak and explain why the proposed treatment fits.
A small, accessible crack is a very different job from a basement or underground leak. Share photos or videos of the leak — where needed, an on-site assessment sets the scope.
Wall, slab, ceiling, basement or underground structure.
Length, depth and number of suspected leak paths.
Active flow, intermittent seepage or persistent damp.
Surrounding concrete and any extra preparation.
Easy reach or special access arrangements.
Removing old decking, repairs and surface preparation.
Not every leak needs the same treatment — but PU injection may be considered when water enters through a crack, joint or other pathway in concrete. Get an assessment if you notice:
Visible or concealed cracks in concrete walls, slabs and structural sections.
Recurring damp patches, water marks or active seepage on concrete walls.
Linked to plumbing, waterproofing failure, cracks or a leak from above.
Ingress through cracks, joints or interfaces under moisture and water pressure.
Construction joints, cold joints and junctions become water entry points.
If the same issue keeps returning, it may be time to assess the whole roof.
Seepage on walls, ceilings, balconies and basements. Check management or authority rules for shared areas.
Leaks in walls, slabs and occupied spaces, planned around operations.
Underground parking and large structures — scoped carefully before a method is proposed.
Service Areas
Property maintenance and waterproofing services island-wide. Contact our team to confirm PU injection availability for your location.
Send us a photo or short video of the leak. We’ll help you work out whether PU injection is the right approach.
A method of sealing suitable concrete cracks, joints and leakage paths by injecting polyurethane resin into the affected area. The resin reacts and cures according to its formulation and surrounding conditions, helping stop water passing through the treated path.
Certain PU injection materials are designed for water-bearing leaks. The result depends on the leak source, concrete condition, water pressure and the material chosen — an assessment is needed to decide if PU injection is appropriate.
Generally: identify the leak path, prepare injection points, install packers where required, inject the chosen PU resin and check the treated area after curing. The exact procedure varies with site conditions and material requirements.
In suitable situations it can be done without extensive hacking, because resin goes in through prepared injection points. Drilling or local preparation may still be needed, and some leaks require more removal or repair. A completely hacking-free result can’t be guaranteed for every project.
It may suit cracks that let water into a structure, but not every crack should be treated with PU resin. If a crack suggests structural movement or another structural concern, it should be assessed by a qualified professional.
It can help when the source is a suitable crack or path in the concrete slab. Ceiling leaks can also come from plumbing defects, bathroom waterproofing failure or other sources, so the actual source must be found first.
Yes, it may be considered for basement leaks through cracks, joints and other entry points. The assessment looks at water pressure, concrete condition and access to the area.
PU injection is commonly used to seal water-bearing cracks and leak paths. Epoxy injection is generally used to bond certain cracks where structural repair is the goal. They aren’t interchangeable — the right material depends on the repair requirement.
There’s no single lifespan. Durability depends on the resin, application quality, structural movement, water conditions and whether the original cause was addressed. A contractor should explain expected performance for your specific project.
It depends on the leak location, affected area, concrete condition, access, material requirements and amount of work. A site assessment or review of photos and details helps set the scope and quotation.
Persistent seepage through concrete affects the condition and usability of your property. The first step is finding the source and deciding if PU injection is right.
Concrete cracks, ceiling leakage, basement seepage or water through joints — get in touch to discuss the problem and arrange an assessment.
Emergency roof repair · 24/7
Emergency roof repair · 24/7